Roland E-X50 - Page 34

- 34 -
up or down in a 2-cent
increment.
Upper tone octave
OctvR1
-2 ~ +2 (default: 0)
Shift the pitch of the specified
tone layer up or down by one
octave.
Dual tone octave
OctvR2
-2 ~ +2 (default: 0)
Split tone octave
OctvL
-2 ~ +2 (default: 1)
KEYBOARD
Touch response
Touch
OFF,1 ~ 3 (default: 2)
Set the velocity response of the
keyboard.
Split point
SplitPt
1 ~ 61 (default: 19)
Set the split point for Split mode
and Chord mode.
Pedal function
Pedal
Sustain
Soft
Memory
Sta/Stp
(default: Sustain)
Assign different functions to the
footswitch.
Sustain type
Ped Rel
ON,OFF (default: OFF)
Set the sustain type so that it will
produce different sustain effect.
ACCOMP
Accomp volume
AcmpVol
0 ~ 32 (default: 26)
Adjust the accompaniment
volume.
One finger key
OneFKey
OFF,C,C#,D,D#,E,F,F#,
G,G#,A,A#,B (default:
OFF)
Set the root note of one finger
key function.
Fade time
FdTime
1 ~ 20 (default: 10)
Set the fade in/out time.
EFFECT
Reverb type
RevType
Hall 1
Hall 2
Hall 3
Hall 4
PnoHall
Room 1
Room 2
Room 3
Church
Garage
RevStdH
(default: RevStdH)
Select the reverb type.
Reverb level
Rev Lv
0 ~ 32 (default: 28)
Adjust the reverb level of the
current reverb type.
Upper tone reverb
level
RevLvR1
0 ~ 32 (default: 9)
Adjust the reverb level of the
upper tone.
Dual tone reverb level
RevLvR2
0 ~ 32 (default: 9)
Adjust the reverb level of the
dual tone.
Split tone reverb level
RevLvL
0 ~ 32 (default: 9)
Adjust the reverb level of the
split tone.
EQ
EQ
Piano
Pop
Select the EQ type.