Roland E-X50 - Function Menu

- 33 -
menu.
3. Press the [ENTER] button to format the USB flash drive, or press the [EXIT] button to cancel.
4. After formatting, it will return to the USB menu.
Note:
Formatting will delete all data on the USB flash drive. It may take several minutes to format a USB flash drive of large
capacity.
Function Menu
1. Press the [MENU] button to enter the function menu.
2. Use the [<] / [>] button to select a parameter category. After a
second, the LCD automatically shows the parameter.
3. Use the data dial to select a parameter. Then press the [ENTER]
button to move the cursor to the lower menu to set the parameter.
4. Use the data dial or the [EXIT] + [<] / [>] buttons to change the
setting.
Press [EXIT] + [<] + [>] buttons simultaneously to restore the
default setting of the current parameter.
5. Press the [EXIT] button to go back.
6. Press the [STYLE] or [TONE] button to exit the function menu.
Detailed parameters and their ranges:
Parameter
category
Parameter
LCD
display
Range Description
MIXER
Music volume
MusicVl
0 ~ 32 (default: 26)
You can separately adjust the
volume of each track to keep an
appropriate volume balance.
Upper tone volume
Upper1
0 ~ 32 (default: 25)
Dual tone volume
Upper2
0 ~ 32 (default: 20)
Split tone volume
Lower
0 ~ 32 (default: 18)
Metronome volume
MetroVl
0 ~ 32 (default: 25)
Mic volume
Mic Vol
0 ~ 32 (default: 12)
Percussion volume
Perc
0 ~ 32
Drum volume
Drum
0 ~ 32
Bass volume
Bass
0 ~ 32
Accomp 1 volume
Accomp1
0 ~ 32
Accomp 2 volume
Accomp2
0 ~ 32
Accomp 3 volume
Accomp3
0 ~ 32
Accomp 4 volume
Accomp4
0 ~ 32
Accomp 5 volume
Accomp5
0 ~ 32
TUNING
Tune
Tune
-50 ~ +50 (default: 0)
Adjust the pitch of the keyboard