Roland ep-5 User Manual

MIDI Connections
— ЖИРИ.
R L (MONO) ta
This connector is where MID! messages are
received. If you wish to have the ep-5 be played
as a result of messages sent by a MIDI se-
quencer or other external unit, connect a cable
so it runs from here to the MIDI OUT connector
on the external device.
From this connector MIDI messages are trans-
mitted. If you wish to use the ep-5 to play the
sounds of another MIDI compatible unit, such
as a sound module; or want to send the infor-
mation describing what you play to a sequencer
for recording, connect a cable so it runs from
here to the MIDI IN connector on the external
device.
In order to make the connections between the
connectors on two units, you will need to have at
least one MIDI Cable. (MSC-15/25/50, sold sepa-
rately.)
Example Setups
е Connecting a sound module, such as the MT-32 е Connecting a sequencer
eps
sequencer
THAUOUTIN
е Connecting the MT-100
ep.5

Roland ep-5 Specifications

General

Brand	Roland
Model	ep-5
Category	Musical Instrument
Language	English