Roland ep-5 User Manual

Making the Connections/Powering up
Before making any connections, make sure you have the power on your instrument turned off.
ен CEE BEER ma
0006
These connectors are used
when you wish to connect the
ep-5 to another MIDI-equipped
device. For details please refer
to the separate "MIDI Guide-
book".
Once all connections have been
properly made, press the Power
Switch to turn the unit on.
(The red indicator will light.)
ePOWER
jack.
With the pedal depressed,
notes will linger on after being
played. With sounds which
maintain a constant volume
level, such as Strings and Pipe
Organ, notes you play will con-
tinue sounding as long as the
pedal is depressed. (Use the optional DP-2 (or similar) pedal)
Listening to the Demo
If desired, you can have your
keyboard produce a more im-
pressive sound by connec ting
й with a stereo system or ampli-
fier/speaker setup. To connect
the units, plug audio cables
into the keyboard's Output
jacks and plug the other ends
into the Input jacks on your
sound system. If the equipment
you are going to use can only
receive a monaural signal, use
the keyboard's L (Mono) Output
Cord Hook
played.
(The supplied AC Adaptor; ACI-100)
(DPress PIANO, VIBRAPHONE and STRINGS si-
multaneously.
PIANO E PIANO VIBRAPHONE ORGAN STRINGS
The demonstration song will start playing.
@To stop playback of the demo, press any Voice
button.
PIANO E PIANO VIBRAPHONE ORGAN STRINGS
Es ws
(Adjust the volume.
VOLUME
Decreases Increases
The Cord Hook conveniently allows
you to secure the AC adaptor cord,
thus preven ting it from accidently
coming loose while the unit is being

Roland ep-5 Specifications

General

Brand	Roland
Model	ep-5
Category	Musical Instrument
Language	English