Roland EV-1-WL - Page 15

15
Turn the mobile device and the
EV-1-WL o and then on again
1. Turn o the mobile device and the
EV-1-WL.
2. Wait for about 10 seconds and turn the
power on again.
3. Start pairing again by following the
steps in “Connecting the EV-1-WL to
EV-1-WL Editor (iOS)” (p. 9).
* If you are still unable to connect with the
app even after taking these measures, please
contact the Roland customer service center.
Unpairing
1. With the Bluetooth indicator on
the EV-1-WL lit up blue, hold down
the [Bluetooth] button to make the
indicator blink blue.
2. Turn the Bluetooth switch o.