3
4. Press the EV-1-WL’s [Bluetooth] button.
The unit enters pairing mode, and the Bluetooth
indicator rapidly blinks blue.
* If the devices do not pair after one minute has
passed, pairing mode is automatically canceled.
5. Launch the “EV-1-WL Editor” app that
you installed on your mobile device.
6. Tap [Bluetooth MIDI DEVICE] that
appears on the app you launched, and
turn location data on.
* Note that the EV-1-WL Editor does not use
location data.
7. Tap “EV-1-WL.”
On the mobile device screen, verify that “*”
is shown at the upper right of EV-1-WL. The
Bluetooth indicator on the EV-1-WL stops blinking
and remains lit when pairing is nished.
* “EV-1-WL+” appears if the unit is already paired
to another device.
* If “EV-1-WL” is not shown, tap “SCAN” at the very
bottom of the Bluetooth Devices screen to scan
again.
* If the Bluetooth indicator on the EV-1-WL is
not rapidly blinking blue, press the [Bluetooth]
button once more to make it do so.
To Next Page
Loading...
