Roland EXR-5 - Page 16

Oct.2003
18
PITCH BENDER TEST
Pressing button 4, the display visualizes:
OFF 0
Moving the Pitch Bender lever onwards, the value changes from OFF to ON. When releasing it,
the value changes from ON to OFF.
Moving the lever all leftwards, the display visualizes –128; moving the lever all rightwards, the
display visualizes 127. Releasing the lever in central position, the display visualizes 0.
Press 0 (Exit) twice to go back to the main menu.
(P2) Rear Panel Test
Go to main menu and press button 2. The display visualizes:
Connect a Sustain Pedal (ie.:DP-2) to EXR-5 FOOT SWITCH output.
Press button 1 to select the pedal test. Nothing is visualized on the display.
Foot MIDI
Press and release the pedal. The display visualizes:
XXX: ON if the pedal is full pressed; OFF if the pedal is released. Press 0 (Exit).
MIDI Test
Pressing button 2, the display visualizes:
A
fter connecting the Midi cable by short-circuiting the IN / OUT sockets, the display visualizes:
OK (successful connection) or
ER (connection failed).
To exit press button 0 (Exit) then, press button 1
Sus XXX
IN < - > OUT