Editing a Pad Sample
102102
Exporting All Pad Samples in WAV Format
(EXPORT ALL WAV)
Here’s how all pad samples of BANK 1–4 can be exported in WAV
format.
1. On the SAMPLE PAD screen, touch <SAMPLE
UTILITY>.
The SAMPLE UTILITY window appears.
2. Select <EXPORT ALL (WAV)>.
A conrmation message appears.
If you decide to cancel, select [E6] CANCEL.
3. Select [E5] OK.
All samples are exported.
4. Select [E6] CLOSE to close the screen.
The exported WAV le is saved in the “EXPORT SAMPLE”
folder of the USB ash drive.
* If the export-destination contains a le of the same name, the
message “Duplicate File Name! Overwrite it?” appears. Select [E5]
OK to overwrite, or select [E6] CANCEL to cancel.
NOTE
Never turn o the power while data is being exported.
MEMO
The exported WAV le is 48 kHz 16-bit format.
To Next Page
Loading...
