Roland FANTOM-06

Editing the Eects
6868
Editing Eects Shared by All Zones
Here’s how to edit the eect units that are shared by all zones, such
as IFX 1–2, CHORUS, and REVERB.
1. On the EFFECTS EDIT screen, touch the
<INTERNAL> tab.
INTERNAL tab
2. Select a zone.
Turning each eect on/o
3. In the screen, touch <IFX1>, <IFX2>, <CHORUS>,
or <REVERB> to turn each eect on/o.
Editing the parameters
3. In the section that you want to edit, touch <EDIT>.
The EFFECTS EDIT ZOOM screen appears.
IFX1/IFX2
In this screen you can edit major parameters such as the IFX
on/o status, the IFX connection order, the eect type, and
the send level and output destination from the IFX.
CHORUS/REVERB
In this screen, you can edit major parameters such as
the CHORUS/REVERB on/o status, the send levels from
the zone, the eect type, the eect level, and the output
destination.
4. Move the cursor to the desired parameter, and
edit the value.
5. If you want to make detailed edits, touch <EDIT>
in the section that you want to edit.
The EFFECT PRO EDIT screen appears.
Menu Explanation
[E1] Scrolls the cursor up or down.
[E6]
Edits the value of the parameter selected by the
cursor.
6. Move the cursor to the desired parameter, and
edit the value.
NOTE
The edited eect settings are temporary. They will be lost if you
turn o the power, or if you select another scene. If you want to
keep the settings, save the scene.