22
Using the Pads to Play Sequenced Phrases (RPS)
1. Use the sequencer to record a phrase.
➝
Owner’s Manual
“Recording into a Phrase”
(p. 220)
2. Save the phrase.
➝
Owner’s Manual
“Saving a Phrase (Save)”
(p. 216)
3. Select the phrases played by each pad.
➝
This manual
“Selecting a phrase”
(p. 21)
Phrases will play at the same tempo as the song.
1. Press [TEMPO].
The Tempo window appears.
2. Turn the VALUE dial or use [INC] [DEC] to specify the playback tempo.
• By holding down [SHIFT] and turning the VALUE dial you can make fine adjustments below the decimal
point.
• If you press [F7 (Click)] to turn it on, a click will sound at the specified tempo. The click will turn on/off
each time you press the button.
• If you press [F6 (Tap Tempo)], you can specify the tempo by repeatedly pressing the button at the desired
tempo (Tap Tempo). Press the button three times or more at quarter-note intervals of the desired playback
tempo.
3. When you’ve finished making settings, press [F8 (Close)].
Using the pads to play phrases you recorded in the sequencer
Specifying the phrase playback tempo
Fantom-G_q_e.book 22 ページ ２００８年２月４日 月曜日 午後２時２６分
To Next Page
Loading...
