31
Realtime-recording the Rhythm Using MIDI
Now let’s use MIDI to realtime-record the rhythm part.
The pads are a suitable way to record a percussion instrument performance. Realtime recording is the
method in which your performance is recorded exactly as you strike the pads.
1. Press [PAD MODE] and then press pad [2] (RHYTHM).
2. When you press a pad [1]–[16], you’ll hear a rhythm sound.
If you press [STUDIO] and then press [F6 ( )] to access the mixer screen (Mixer 2), you’ll
be able to see which part plays the pads. By default, part 10 is assigned to be played by the
rhythm pads.
padmode_e.eps
If you want to play the rhythm set from the keyboard, use the cursor buttons to select (highlight)
part 10.
If you want to change the rhythm set sounds, refer to
“Selecting patches (sounds)”
(p.
29) in this manual, and select the desired sound.
Changes you make are temporary, and will be lost when you turn off the power, switch the
sound generator mode, or select a different studio set. If you want to keep the studio set you
edited, you must save the studio set as described in
“Saving the settings you’ve made”
(p. 8 of this manual).
Using the pads to record the rhythm
Setting the pad mode to RHYTHM
The part whose Rhythm Pad Part (RHY) switch is on
Fantom-G_q_e.book 31 ページ ２００８年２月４日 月曜日 午後２時２６分
To Next Page
Loading...
Need help?
General
