Roland Fantom G6 User Manual

43
Mastering
Mastering is the final state of song production, in which you apply a compressor and equalizer to add the
final touches to the song. If your completed song is lacking in overall power, or if it sounds quite different
when played back in a different environment, you should pay attention to the adjustments of the mastering
process.
1. Press [EFFECTS (ROUTING)] to access the Effects screen.
2. Press [F7 (Mastering)].
3. Use cursor buttons to move the cursor to the parameter you wish to modify.
4. Turn the VALUE dial or press [INC] [DEC] to get the value you want.
The Fantom-G’s mastering effect provides several preset settings. You can use these to easily try out different
variations of mastering settings.
For more about mastering
➝ “Mastering Effect” (p. 160) in the Owner’s Manual
Using mastering to complete your song
Hard Comp
Soft Comp
You can select either hard or soft compression. Start by choosing one of these settings as desired,
and then make fine adjustments.
Low Boost
Mid Boost
High Boost
In addition to the compressor effect, these provide variations of output volume for each frequency
band, producing an equalizer-like effect.
On/Off Switch
Mastering Setting
Fantom-G_q_e.book 43 ページ ２００８年２月４日 月曜日 午後２時２６分

Roland Fantom G6 Specifications

General

Keyboard	61 keys (with velocity and channel aftertouch)
Polyphony	128 voices
Wave Memory	256 MB (16-bit linear equivalent)
Arpeggiator	Yes
Sound Generator	ARX SuperNATURAL sound engine
Display	8.5-inch color LCD
Sequencer	16 MIDI tracks
Effects	Multi-effects, reverb, chorus, mastering effects
Sampling	16-bit linear, 44.1 kHz
USB	USB MIDI, USB Audio, USB Storage
Expansion	2 ARX expansion slots
Storage	USB memory
Connectivity	MIDI In/Out/Thru, USB
Weight	14.5 kg