90
Creating a Performance
Ext Pan (External Pan)
If you want Pan messages to also be transmitted when you select a
Performance, specify the desired value (L64–0–63R) for the part. If
you do not want this message to be transmitted, set this to “OFF.”
Value:
L64–0–63R, OFF
The data of the part for which the Keyboard Switch is turned off
will not be transmitted.
[8 (MIDI Filter)]
fig.06-29_50
For details on the setting, refer to
“Adjusting the Parameters of
Each Part”
(p. 84).
MIDI Filter
Program Change
(Receive Program Change Switch)
For each MIDI channel, specify whether MIDI Program Change
messages will be received (ON), or not (OFF). Assigning a check
mark (
✔
) will turn it on, and removing the check mark will turn it
off.
Bank Select (Receive Bank Select Switch)
For each MIDI channel, specify whether MIDI Bank Select messages
will be received (ON), or not (OFF). Assigning a check mark (
✔
) will
turn it on, and removing the check mark will turn it off.
Pitch Bend (Receive Pitch Bend Switch)
For each MIDI channel, specify whether MIDI Pitch Bend messages
will be received (ON), or not (OFF). Assigning a check mark (
✔
) will
turn it on, and removing the check mark will turn it off.
Channel Pressure (Receive Channel Pressure Switch)
For each MIDI channel, specify whether MIDI Channel Pressure
messages will be received (ON), or not (OFF). Assigning a check mark
(
✔
) will turn it on, and removing the check mark will turn it off.
Polyphonic Key Pressure
(Receive Polyphonic Key Pressure Switch)
For each MIDI channel, specify whether MIDI polyphonic key pressure
messages will be received (ON), or not (OFF). Assigning a check mark
(
✔
) will turn it on, and removing the check mark will turn it off.
Modulation (Receive Modulation Switch)
For each MIDI channel, specify whether MIDI Modulation messages
will be received (ON), or not (OFF). Assigning a check mark (
✔
) will
turn it on, and removing the check mark will turn it off.
Volume (Receive Volume Switch)
For each MIDI channel, specify whether MIDI Volume messages will
be received (ON), or not (OFF). Assigning a check mark (
✔
) will turn
it on, and removing the check mark will turn it off.
Pan (Receive Pan Switch)
For each MIDI channel, specify whether MIDI Pan messages will be
received (ON), or not (OFF). Assigning a check mark (
✔
) will turn it
on, and removing the check mark will turn it off.
Expression (Receive Expression Switch)
For each MIDI channel, specify whether MIDI Expression messages
will be received (ON), or not (OFF). Assigning a check mark (
✔
) will
turn it on, and removing the check mark will turn it off.
Hold-1 (Receive Hold 1 Switch)
For each MIDI channel, specify whether MIDI Hold 1 messages will
be received (ON), or not (OFF). Assigning a check mark (
✔
) will turn
it on, and removing the check mark will turn it off.
Phase Lock (Phase Lock Switch)
Set Phase Lock to “
✔
” (ON) when you want to suppress
discrepancies in timing of parts played on the same MIDI channel.
When the Phase Lock parameter is set to “ON,” parts on the
same MIDI channel are put in a condition in which their timing
is matched, enabling them to be played at the same time.
Accordingly, a certain amount of time may elapse between
reception of the Note messages and playing of the sounds. Turn
this setting to “ON” only as needed.
Velocity Curve
Velocity Curve selects for each MIDI channel one of the four
following Velocity Curve types that best matches the touch of the
connected MIDI keyboard. Set this to “OFF” if you are using the
MIDI keyboard's own velocity curve.
Value:
OFF, 1–4
fig.Curve-4
2134
Reference_e.book 90 ページ ２００３年７月１４日 月曜日 午後３時２５分
To Next Page
Loading...
Need help?
General
