EasyManuals Logo

Roland fp-30 Midi Implementation

Roland fp-30
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
MIDI Implementation
14
40 1x 1A 00 00 01 007F VELOCITY SENSE DEPTH 0127 40 64
40 1x 1B 00 00 01 007F VELOCITY SENSE OFFSET 0–127 40 64
40 1x 1C 00 00 01 00–7F PART PANPOT -64 (RANDOM) 40 0 (CENTER)
(= CC# 10, except RANDOM) -63 (LEFT)–+63 (RIGHT)
40 1x 1D 00 00 01 00–7F KEY RANGE LOW (C-1)–(G9) 00 C-1
40 1x 1E 00 00 01 007F KEY RANGE HIGH (C-1)–(G9) 7F G 9
40 1x 1F 00 00 01 00–5F CC1 CONTROLLER NUMBER 0–95 10 16
40 1x 20 00 00 01 00–5F CC2 CONTROLLER NUMBER 0–95 11 17
40 1x 21 00 00 01 00–7F CHORUS SEND LEVEL 0127 00 0
(= CC# 93)
40 1x 22 00 00 01 007F REVERB SEND LEVEL 0–127 28 40
(= CC# 91)
40 1x 23 00 00 01 0001 Rx. BANK SELECT OFF/ON 01 (00*) ON (OFF*)
* “Rx. BANK SELECT” is set to OFF by “GM1 System On,” and Bank Select message will be ignored.
* “Rx. BANK SELECT” is set to ON by “GM2 System On.”
* “Rx. BANK SELECT” is set to ON by power-on Reset or by receiving “GS RESET.
40 1x 24 00 00 01 0001 Rx. BANK SELECT LSB OFF/ON 00 OFF
* This instrument can be recognized Bank Select LSB (40H43H) even if this message is OFF.
40 1x 25 00 00 01 0001 TONE REMAIN OFF/ON 01 ON
40 1x 28 00 00 03 007F Bank Select LSB Range LSB (from) 40 40H
40 1x 29# LSB (to) 43 43H
40 1x 30 00 00 01 0E–72 TONE MODIFY 1 -50–+50 40 0
Vibrato rate (= NRPN# 8)
40 1x 31 00 00 01 0E–72 TONE MODIFY 2 -50–+50 40 0
Vibrato depth (= NRPN# 9)
40 1x 32 00 00 01 0E–72 TONE MODIFY 3 -50–+50 40 0
TVF cuto frequency (= NRPN# 32)
40 1x 33 00 00 01 0E–72 TONE MODIFY 4 -50–+50 40 0
TVF resonance (= NRPN# 33)
40 1x 34 00 00 01 0E–72 TONE MODIFY 5 -50–+50 40 0
TVF & TVA Env.attack (= NRPN# 99)
40 1x 35 00 00 01 0E–72 TONE MODIFY 6 -50–+50 40 0
TVF & TVA Env.decay (= NRPN# 100)
40 1x 36 00 00 01 0E–72 TONE MODIFY 7 -50–+50 40 0
TVF & TVA Env.release (= NRPN# 102)
40 1x 37 00 00 01 0E–72 TONE MODIFY 8 -50–+50 40 0
Vibrato delay (= NRPN# 10)
40 1x 40 00 00 0C 007F SCALE TUNING C -64+63 [cent] 40 0 [cent]
40 1x 41# 00–7F SCALE TUNING C# -64+63 [cent] 40 0 [cent]
40 1x 42# 00–7F SCALE TUNING D -64+63 [cent] 40 0 [cent]
40 1x 43# 00–7F SCALE TUNING D# -64–+63 [cent] 40 0 [cent]
40 1x 44# 00–7F SCALE TUNING E -64–+63 [cent] 40 0 [cent]
40 1x 45# 00–7F SCALE TUNING F -64+63 [cent] 40 0 [cent]
40 1x 46# 00–7F SCALE TUNING F# -64–+63 [cent] 40 0 [cent]
40 1x 47# 00–7F SCALE TUNING G -64–+63 [cent] 40 0 [cent]
40 1x 48# 00–7F SCALE TUNING G# -64+63 [cent] 40 0 [cent]
40 1x 49# 00–7F SCALE TUNING A -64+63 [cent] 40 0 [cent]
40 1x 4A# 00–7F SCALE TUNING A# -64–+63 [cent] 40 0 [cent]
40 1x 4B# 00–7F SCALE TUNING B -64–+63 [cent] 40 0 [cent]
* SCALE TUNING is a function that allows ne adjustment to the pitch of each note in the octave. The pitch of each identically-named note in all octaves will change
simultaneously. A setting of +/- 0 cent (40H) is equal temperament. Refer to section 4. Supplementary Material, “The Scale Tune Feature.”
40 2x 00 00 00 01 28–58 MOD PITCH CONTROL -24–+24 [semitone] 40 0 [semitones]
40 2x 01 00 00 01 00–7F MOD TVF CUTOFF CONTROL -9600+9600 [cent] 40 0 [cent]
40 2x 02 00 00 01 00–7F MOD AMPLITUDE CONTROL -100.0–+100.0 [%] 40 0 [%]
40 2x 03 00 00 01 00–7F MOD LFO1 RATE CONTROL -10.0+10.0 [Hz] 40 0 [Hz]
40 2x 04 00 00 01 00–7F MOD LFO1 PITCH DEPTH 0600 [cent] 0A 47 [cent]
40 2x 05 00 00 01 00–7F MOD LFO1 TVF DEPTH 0–2400 [cent] 00 0 [cent]
40 2x 06 00 00 01 00–7F MOD LFO1 TVA DEPTH 0100 [%] 00 0 [%]
40 2x 07 00 00 01 00–7F MOD LFO2 RATE CONTROL -10.0+10.0 [Hz] 40 0 [Hz]
40 2x 08 00 00 01 00–7F MOD LFO2 PITCH DEPTH 0600 [cent] 00 0 [cent]
40 2x 09 00 00 01 00–7F MOD LFO2 TVF DEPTH 0–2400 [cent] 00 0 [cent]
40 2x 0A 00 00 01 00–7F MOD LFO2 TVA DEPTH 0100.0 [%] 00 0 [%]
40 2x 10 00 00 01 40–58 BEND PITCH CONTROL 0–24 [semitone] 42 2 [semitones]

Other manuals for Roland fp-30

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Roland fp-30 and is the answer not in the manual?

Roland fp-30 Specifications

General IconGeneral
CertificationFCC, CE
Sound effectsAmbience, Brilliance
Tones quantity35
Pedals quantity1
RMS rated power24 W
Speaker diameter120 mm
Number of speakers2
Metronome tempo range20 - 250 bpm
Metronome beats per bar0, 2, 3, 4, 5
Maximum polyphony (notes)128
Bluetooth version4.0
USB connector typeUSB Type-A, USB Type-B
Headphone connectivity3.5 mm
AC input voltage100 - 240 V
Power source typeAC
AC input frequency50 - 60 Hz
Power consumption (max)22 W
Power consumption (min)3 W
Built-in displayNo
Country of originMalaysia
Tuning frequency415.3 - 466.2 Hz
Demo songs quantity30
Transposition range-6 - 5 octave(s)
Sound pressure level120 dB
Product colorWhite
Keys quantity88 keys
Number of keyboard sensitivity levels5
Weight and Dimensions IconWeight and Dimensions
Depth284 mm
Width1300 mm
Height150 mm
Weight14100 g

Related product manuals