Roland GC-408 - Wiring Diagram

7
WIRING DIAGRAM
GC-408/GC-408S
Dec, 1997
IMPORTANT NOTE ! (For 117V version)
When you replace the AC Switch for 117V version, basic safety
precations should always be followed including the following.
(Refer to fig 1.)
Switch Cover
Secured by nylon tie tightly
Glue : 1603HFR (Flame Class: 94V-0) HAN NONG POLYMER CO.LTD.
P/No. SS000107
AC Switch
NOTE : Mounting of AC Switch
The switch cover must be secured to the ac switch by nylon tie.
The gap between Metal Chassis and Switch Cover must be filled up with glue with flammability of 94V-0.
Fig.1