Roland GP-6 - Connecting to Mobile Devices via Bluetooth; Play Music Through Piano Speakers

20
°
Connecting the Piano and a Mobile Device via Bluetooth®
Here’s What You Can Do
Bluetooth functionality creates a wireless connection between a mobile
device such as a smartphone or tablet (subsequently referred to as “mobile
device”) and the piano, letting you do the following.
ÓPlay Music Through the Piano’s Speakers
Music data stored on your mobile device can be played wirelessly through
the piano’s speakers.
Speakers
ÓUsing the Piano with an App
Install the app (“Roland Piano App” by Roland) on your mobile device to
exchange data with the piano.
Play Music Through the Piano’s Speakers
Here’s how to congure the settings so that music data saved on your
mobile device can be played wirelessly through the piano’s speakers.
* Once a mobile device has been paired with the piano, there is no need
to pair again. Refer to “Connecting an Already-Paired Mobile Device”
(p. 21).
Initializing the Settings (Pairing)
This example shows how to congure the settings for iOS/iPadOS devices.
If you are using an Android device, refer to the instructions for settings in
the owner’s manual that came with your mobile device.
1. Place the mobile device that you want to connect near the
piano.
2. Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
3. Press the [–] [+] buttons to access the “Bluetooth” screen, and
press the [ ] button to conrm.
The following screen appears.
4. Press the [ ] knob to begin pairing.
If you decide to cancel pairing, press the [ ] button.
MEMO
Long-press the [
] button to start pairing immediately.
5. Turn on the Bluetooth function of the mobile device.
page
20
page
21
App “Roland Piano App”
Pairing
To use Bluetooth, you must rst “pair” the piano with your mobile
device to create a one-to-one connection between them.
“Pairing” is the procedure of registering (mutually authenticating) your
mobile device with the piano.
Pair the devices by following the steps shown for each function.
Pairing
The pairing process
Separate pairing is required for “playing music through the piano’s
speakers” and for “using the piano with an app”. Note that these
processes are dierent.
Playing music through
the piano’s speakers
Using the piano with
an app
Settings on the piano
Settings on the mobile device Settings on the App
App
Settings on the mobile device