Roland GP-6 - Reg. Pedal Shift; Display Contrast; Screen Saver; Touch Click Volume

27
Conguring the Various Settings
Indication Value Explanation
Reg. Pedal Shift
Using the Pedal to Switch Between Registrations (Reg. Pedal Shift)
You can use the pedal to switch between the registrations (p. 11). This lets you switch to the next registration by depressing the pedal.
* The pedal function settings are prioritized as follows: “Reg. Pedal Shift”Ó“Center Pedal/Left Pedal”.
O (default setting) The registration doesn’t change when you depress the pedal.
Left Pedal The left pedal (soft pedal) is used to switch between registrations. When doing so, you can’t use the Left Pedal settings when assigned.
Center Pedal The center pedal (sostenuto pedal) is used to switch between registrations. When doing so, you can’t use the Center Pedal settings when assigned.
MIDI-related settings
Local Control
Preventing Doubled Notes When Connected to a Sequencer (Local Control)
When you have a MIDI sequencer connected via USB, set this parameter to Local O.
Since most sequencers have their Thru function turned on, notes you play on the keyboard may be sounded in duplicate, or get dropped. To prevent this, you can enable
the “Local O” setting so that the keyboard and internal sound generator will be disconnected.
On (default setting) Local Control is on. The keyboard is connected to the internal sound generator.
O
Local Control is o.
The keyboard is disconnected from the internal sound generator. Playing the keyboard will not produce sound.
MIDI Transmit Ch.
MIDI Transmit Channel Settings (MIDI Transmit Ch.)
This setting species the MIDI channel on which the unit will transmit. This unit will receive all sixteen channels (1–16).
O, 1–16 (default value: 1)
Overall operation settings
Language
Changing the Language Displayed in the Screen (Language)
You can change the language that is displayed in the screen.
English, Japanese, Chinese (default value: English)
Display Contrast
Adjusting the Brightness of the Display (Display Contrast)
You can adjust the brightness of the piano’s display.
1–10 (default value: 5)
Screen Saver
Specifying the Time Until the Operating Panel Is Dimmed (Screen Saver)
If no operations are performed for a specic length of time, the operating panel’s button LEDs and display are dimmed. You can specify the time until they are dimmed.
O, 30 sec., 1 min., 5 min., 10 min. (default value: o)
Touch Click
Volume
Setting the Operating Panel Click Sound (Touch Click Volume)
You can adjust the click sound that’s heard when you touch the buttons on the operating panel.
O, 1–10 (default value: 5)
Volume Limit
Specifying a Maximum Volume (Volume Limit)
You can specify a maximum volume value. This lets you prevent loud sound from being produced unintentionally.
20, 40, 60, 80, 100 (maximum) (default value: 100)
Auto-Power O
When Keyboard
Cover is Closed
Turning O the Power When You Close the Keyboard Cover (Power O by the Lid)
You can choose whether the power turns o when you close the keyboard cover.
Eective
(default setting)
The power turns o when you close the keyboard cover.
Ineective
The power does not turn o when you close the keyboard cover. To turn o the power, press the [Ā] button.
* If Auto O is specied, the power automatically turns o when a certain length of time has elapsed after you stop playing or operating the
instrument.
Speaker Auto
Mute
Outputting Sound from Both Headphones and the Built-in Speakers (Speaker Auto Mute)
By factory default, the built-in speakers are set not to make sound when you connect a pair of headphones into the Phones jack. By changing the settings, you can make
sound come from both the headphones and the built-in speakers.
* Changing the setting to “O” also changes the tonal character of the sound you hear in your headphones.
O Sound comes from both headphones and built-in speakers.
On (default setting) Sound comes only from headphones.
Auto O
Making the Power Automatically Turn o After a Time (Auto O)
With the factory settings, the unit’s power automatically switches o after you stop playing or operating the unit for the amount of time you set. (This is the factory default
setting.)
If you don’t want the power to turn o automatically, change the “Auto O” setting to “O”.
O, 10 min., 30 min., 240 min. (default value: 30 min.)