Roland HandSonic HPD-20 - Page 3

MIDI Implementation
3
 General Purpose Controller 4 (Controller Number 19)
Status 2nd byte 3rd byte
BnH 13H vvH
n = MIDI channel number: 0H–FH (ch.1–ch.16)
vv = control value 00H–7FH (0–63: OFF, 64–127: ON)
* This message is used as Realtime Modify (PITCH) on/o information.
 Hold 1 (Controller Number 64)
Status 2nd byte 3rd byte
BnH 40H vvH
n = MIDI channel number: 0H–FH (ch.1–ch.16)
vv = control value 00H–7FH (0–63: OFF, 64–127: ON)
* This message is used as Roll on/o information.
 Sound Controller 1 (Controller Number 70)
Status 2nd byte 3rd byte
BnH 46H vvH
n = MIDI channel number: 0H–FH (ch.1–ch.16)
vv = control value 00H–7FH (0–127)
* When D-BEAM CC# (MENU --> SYS --> MIDI --> MIDI) setting is “SOUND1 (70) ,” this
message is used as D-BEAM position information.
* When Realtime Modify Pitch CC# (MENU --> SYS --> MIDI --> MIDI) setting
is “SOUND1 (70) ,” this message is used as Realtime Modify (PITCH) control
information.
* When Realtime Modify Eect CC# (MENU --> SYS --> MIDI --> MIDI) setting
is “SOUND1 (70) ,” this message is used as Realtime Modify (EFFECT) control
information.
 Sound Controller 2 (Controller Number 71)
Status 2nd byte 3rd byte
BnH 47H vvH
n = MIDI channel number: 0H–FH (ch.1–ch.16)
vv = control value 00H–7FH (0–127)
* When D-BEAM CC# (MENU --> SYS --> MIDI --> MIDI) setting is “SOUND2 (71) ,” this
message is used as D-BEAM position information.
* When Realtime Modify Pitch CC# (MENU --> SYS --> MIDI --> MIDI) setting
is “SOUND2 (71) ,” this message is used as Realtime Modify (PITCH) control
information.
* When Realtime Modify Eect CC# (MENU --> SYS --> MIDI --> MIDI) setting
is “SOUND2 (71) ,” this message is used as Realtime Modify (EFFECT) control
information.
 Sound Controller 3 (Controller Number 72)
Status 2nd byte 3rd byte
BnH 48H vvH
n = MIDI channel number: 0H–FH (ch.1–ch.16)
vv = control value 00H–7FH (0–127)
* When D-BEAM CC# (MENU --> SYS --> MIDI --> MIDI) setting is “SOUND3 (72) ,” this
message is used as D-BEAM position information.
* When Realtime Modify Pitch CC# (MENU --> SYS --> MIDI --> MIDI) setting
is “SOUND3 (72) ,” this message is used as Realtime Modify (PITCH) control
information.
* When Realtime Modify Eect CC# (MENU --> SYS --> MIDI --> MIDI) setting
is “SOUND3 (72) ,” this message is used as Realtime Modify (EFFECT) control
information.
 Sound Controller 4 (Controller Number 73)
Status 2nd byte 3rd byte
BnH 49H vvH
n = MIDI channel number: 0H–FH (ch.1–ch.16)
vv = control value 00H–7FH (0–127)
* When D-BEAM CC# (MENU --> SYS --> MIDI --> MIDI) setting is “SOUND4 (73) ,” this
message is used as D-BEAM position information.
* When Realtime Modify Pitch CC# (MENU --> SYS --> MIDI --> MIDI) setting
is “SOUND4 (73) ,” this message is used as Realtime Modify (PITCH) control
information.
* When Realtime Modify Eect CC# (MENU --> SYS --> MIDI --> MIDI) setting
is “SOUND4 (73) ,” this message is used as Realtime Modify (EFFECT) control
information.
 Sound Controller 5 (Controller Number 74)
Status 2nd byte 3rd byte
BnH 4AH vvH
n = MIDI channel number: 0H–FH (ch.1–ch.16)
vv = control value 00H–7FH (0–127)
* When D-BEAM CC# (MENU --> SYS --> MIDI --> MIDI) setting is “SOUND5 (74),” this
message is used as D-BEAM position information.
* When Realtime Modify Pitch CC# (MENU --> SYS --> MIDI --> MIDI) setting
is “SOUND5 (74) ,” this message is used as Realtime Modify (PITCH) control
information.
* When Realtime Modify Eect CC# (MENU --> SYS --> MIDI --> MIDI) setting
is “SOUND5 (74) ,” this message is used as Realtime Modify (EFFECT) control
information.
 Sound Controller 6 (Controller Number 75)
Status 2nd byte 3rd byte
BnH 4BH vvH
n = MIDI channel number: 0H–FH (ch.1–ch.16)
vv = control value 00H–7FH (0–127)
* When D-BEAM CC# (MENU --> SYS --> MIDI --> MIDI) setting is “SOUND6 (75) ,” this
message is used as D-BEAM position information.
* When Realtime Modify Pitch CC# (MENU --> SYS --> MIDI --> MIDI) setting
is “SOUND6 (75) ,” this message is used as Realtime Modify (PITCH) control
information.
* When Realtime Modify Eect CC# (MENU --> SYS --> MIDI --> MIDI) setting
is “SOUND6 (75) ,” this message is used as Realtime Modify (EFFECT) control
information.
 Sound Controller 7 (Controller Number 76)
Status 2nd byte 3rd byte
BnH 4CH vvH
n = MIDI channel number: 0H–FH (ch.1–ch.16)
vv = control value 00H–7FH (0–127)
* When D-BEAM CC# (MENU --> SYS --> MIDI --> MIDI) setting is “SOUND7 (76) ,” this
message is used as D-BEAM position information.
* When Realtime Modify Pitch CC# (MENU --> SYS --> MIDI --> MIDI) setting
is “SOUND7 (76) ,” this message is used as Realtime Modify (PITCH) control
information.
* When Realtime Modify Eect CC# (MENU --> SYS --> MIDI --> MIDI) setting
is “SOUND7 (76) ,” this message is used as Realtime Modify (EFFECT) control
information.