EasyManua.ls Logo

Roland HandSonic HPD-20 - User Manual

Roland HandSonic HPD-20
80 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Owner’s Manual (this document)
Read this rst.
PDF Manual (download from the Web)
• Sound List
This is a list of the sounds and eect parameters built into the
HandSonic.
• MIDI Implementation
This is detailed information about MIDI messages.
To obtain the PDF manual
1.
Enter the following URL in your computer.
http://www.roland.com/manuals/
2. Choose “HandSonic HPD-20” as the product
name.

Table of Contents

Other manuals for Roland HandSonic HPD-20

Preview: Manual
Manual13 pages
Preview: Service Notes
Service Notes53 pages

Questions and Answers

  • J
    Justin DavisAug 13, 2025
    Why is there no sound coming from my Roland Drums?
    • S
      Stanley HigginsAug 13, 2025
      There are several reasons why your Roland Drums might not be producing sound: * Ensure the HandSonic is correctly connected to external devices. * Check for broken audio cables; try a different cable. * Verify you're not using a connection cable with a resistor; use one without a resistor. * Confirm the volume of the connected amp or speaker is at an appropriate level. * Check the volume level on the device connected to the MIX IN jack and adjust if needed. * Make sure that “Local Control” is set to “ON.”
  • K
    Kevin OrtegaAug 17, 2025
    What to do if a specific pad on my Roland HandSonic HPD-20 Drums doesn't sound?
    • J
      Johnny AlexanderAug 17, 2025
      If a specific pad on your Roland Drums isn't producing sound: * Assign an instrument to the pad. * Adjust the instrument’s “Volume.” * If you deleted the user instrument that’s assigned to a pad, that pad will not produce sound. Import the user instrument once again, or assign another instrument. * Adjust the pad’s “Sensitivity.”
  • H
    hernandezjosephAug 21, 2025
    What to do if the external expansion pad on my Roland Drums does not respond correctly?
    • S
      Sean DunnAug 21, 2025
      If the external expansion pad on your Roland Drums isn't responding correctly, set the pad’s “Type.”
  • E
    Erica HallAug 25, 2025
    What to do if my Roland Drums USB flash drive is connected but not recognized?
    • R
      Robert LangAug 25, 2025
      If your Roland Drums aren't recognizing the connected USB flash drive, consider these points: * Ensure the USB flash drive is correctly inserted. * Use a Roland USB flash drive for guaranteed operation. * Format the USB flash drive on the HandSonic. * When importing user instruments, place the files in the top level (root) of the USB flash drive.
  • J
    jchristianAug 28, 2025
    How to connect my Roland HandSonic HPD-20 Drums with a computer?
    • M
      Melanie CaseyAug 28, 2025
      To connect your Roland Drums to a computer: * Ensure the USB cable is correctly connected. * Install the USB driver on your computer.
  • S
    Sharon LoveAug 31, 2025
    Why is there no sound from my Roland Drums using MIDI connection?
    • T
      Tracy EscobarAug 31, 2025
      If you're not getting any sound from your Roland Drums when using a MIDI connection: * Check the MIDI cable connections. * Ensure the MIDI channels of the HandSonic and external MIDI device are set to the same setting. * Set the pad’s “Note#.”
  • J
    Jeff CastilloSep 5, 2025
    What to do if I can’t save data on my Roland HandSonic HPD-20?
    • K
      Kimberly AlvarezSep 5, 2025
      If you can’t save data on your Roland Drums, either delete unneeded files from the USB drive, or use a different USB flash drive.
  • J
    jmartinezSep 8, 2025
    What to do if my Roland HandSonic HPD-20 can’t load or save successfully?
    • D
      Deborah MaddoxSep 8, 2025
      If your Roland Drums can’t load or save successfully, do not strike the pad surface while accessing USB flash drive. The vibration may cause errors.

Summary

What is the HandSonic?

Look What You Can Do with the HandSonic

Overview of the HandSonic's capabilities for musical expression and performance.

Panel Descriptions

Top Panel

Details the controls and indicators on the top surface of the HandSonic.

Rear Panel (Connections)

Explains the various input/output ports on the rear of the HandSonic.

Turning the Power On;Off

Attaching to a Stand

Quick Guide

HandSonic Basics

Introduces fundamental concepts like pads, kits, instruments, and layers.

Performing

Explains how to use the pads and D-BEAM for various performance techniques.

Recording Your Performance (QUICK REC)

Guides on how to record, play back, and export performances.

Frequently Used Functions

Sound Editing

Details how to customize kits by assigning instruments to pads and creating custom sounds.

Using Effects to Modify the Sound (FX)

Introduces multi-effects, ambience, and EQ for sound modification.

Parameter Guide

INST

Covers instrument assignment, editing, and layer settings for each pad.

KIT

Details pad control, kit settings, and MIDI-related configurations.

SYS

Covers system settings like metronome, USB memory, pad/D-BEAM settings.

Appendix

Error Messages

Lists and explains common error messages and their solutions.

Troubleshooting

Provides solutions for common operational problems and issues with sound or connectivity.

Roland HandSonic HPD-20 Specifications

General IconGeneral
Pads13
Instruments850
User Instruments500
Kits200
User Kits100
TypePercussion Pad
SamplingYes
Phrase LoopYes
EffectsEQ
DisplayBacklit LCD
Power SupplyAC adapter (included)
ConnectivityUSB, MIDI In/Out
Weight5.51 lbs

Related product manuals