Roland HandSonic HPD-20 - Applying Ambience to the Sound of each Multi-Effect (Ambience Send MFX); Applying EQ to the Kit (EQ)

What is the HandSonic? Quick Guide Frequently Used Functions Parameter Guide Appendix
FX
53
AMBIENCE SEND–MFX
MENU g FX g AMBIENCE g SEND g MFX
Parameter Explanation
Applying ambience to the sound of each multi-eect (Ambience Send MFX)
For details, refer to p. 29.
MFX1 g AMB
Specify the amount of ambience that is applied to the sound of each multi-eect.
MFX2 g AMB
MFX3 g AMB
EQ
KIT EQ
MENU g FX g EQ
Parameter/Button Explanation
Applying EQ to the kit (EQ)
For details, refer to p. 30.
Q
Adjusts the width of the frequency region selected by “Freq.”
Higher values make the region narrower, producing a more distinctive sound.
* This is available only for MID.
Freq
Selects the frequency range at which the volume will be boosted or cut.
Lower values aect a lower frequency range; higher values aect a higher frequency range.
* The available range diers between LOW/MID/HIGH.
Gain
Species the amount by which the volume is boosted or cut.
Positive (“+”) values boost the frequency region specied by “Freq.”
Negative (“-”) values cut the frequency region specied by “Freq.”
If you don’t want to apply an eect, set this to “0.”
[F3] (EQ) If this is on, EQ will be applied.