Roland HandSonic HPD-20 - Recording Your Performance (QUICK REC)

20
Quick Guide
Recording Your Performance (QUICK REC)
It’s easy to record your HandSonic performance. A recorded performance can be played back, or exported to a USB ash drive as
an audio le.
Listening objectively to your performance is a good way to improve your skill, and you can also use a recorded performance as
material for your rhythm tracks.
Recording
1.
Press the [QUICK REC] button.
The QUICK REC screen will appear.
2.
Press the [F2] (REC) button.
The STANDBY screen will appear.
You can sound the metronome by holding down the [SHIFT] button and
pressing the [QUICK REC] button.
Use the value knob to adjust the tempo.
3.
Begin performing.
Recording will start.
* You can also start recording by pressing the [F1] (START) button.
* If the [F2] (HIT PAD) button is o, recording will not start when you begin
performing.
4.
Press the [F1] (STOP) button to stop recording.
Playing back
5.
Press the [F1] (PLAY) button.
The recorded performance will play.
Press the [F2] (REPEAT) button to make playback repeat.
* Playback will use the sounds of the currently selected kit.
* If you sound the metronome, you can use the value knob to change
the tempo.
6.
Press the [F1] (STOP) button to stop playback.
Playback will stop automatically when it reaches the end of the recorded
performance.
* The recorded performance will disappear when you power-o the HandSonic.
1
2
4
5