Roland HandSonic HPD-20 - Kit Chain; Undo

What is the HandSonic? Quick Guide Frequently Used Functions Parameter Guide Appendix
33
Kit Chain
The Kit Chain function lets you successively switch kits in the order you’ve specied, as needed for the songs in your
performance.
You can create 15 kit chains (banks A–O), and each kit chain can contain up to 50 steps.
Using a kit chain
1. In the kit screen, press the [F1] (CHAIN) button to
turn kit chain on.
The kit chain screen will appear.
2. Use the [F2] ( BANK#) [F3] (BANK# ) buttons to
switch the bank.
3. Use the [-][+] buttons or the value knob to switch
steps.
4. When you’re nished, press the [F1] (CHAIN) button to turn kit chain o.
Creating a kit chain
Refer to “Editing a kit chain (Chain).”
Undo
You can undo a change you’ve made to a kit or instrument.
1. In the kit screen, hold down the [SHIFT] button and press the [KIT] button.
The CONFIRMATION screen will appear.
2. Use the cursor [ ] [ ] buttons to select “YES,” and press the [ENTER] button.
The change will be undone.
* The current kit will return to the state in which it was when you selected it.
If you switch kits, the preceding changes cannot be undone.
* The following changes cannot be undone.
• Loading or changing a user instrument (MENU g USER INST)
• Copying a kit (MENU g TOOLS g KIT COPY)
• Changing a kit chain (MENU g TOOLS g CHAIN)
• Editing a system parameter (MENU g SYS)
Step 50 Step 50
Step 1 Step 1
Bank B Bank O
Step 2 Step 2
Step 50 (Kit 33)
Step 1 (Kit 24)
Bank A (Example)
Step 2 (Kit 9)
Step 3 (Kit 87) Step 3 Step 3
Switch banks
Bank,
Bank name
KIT screen (Kit chain)
Kit chain ON/OFF
Step
CONFIRMATION screen
“Editing a kit chain (Chain)” (p. 58)