Roland HandSonic HPD-20 - Loading a Backup

What is the HandSonic? Quick Guide Frequently Used Functions Parameter Guide Appendix
Backing Up (USB Flash Drive)
39
Loading a Backup
Here’s how to load a backup from a USB ash drive into the HandSonic.
NOTE
When you load a backup, all settings in the HandSonic will be erased.
1. Connect the USB ash drive to the HandSonic.
2. Choose MENU g SYS g USB Memory g Load Backup.
The LOAD BACKUP screen will appear.
3. Specify the backup that you want to load.
Parameter Explanation
With User Inst
Species whether the user instruments will be loaded (
) or will not be
loaded (
).
Backup
Species the backup that will be loaded. Backups that include user
instruments are indicated by ”
.“
* If you load the user instruments, all user instruments in the HandSonic will be deleted.
* Depending on the size of the user instruments, it may take more than 10 minutes to load the backup when loading the
user instruments.
4. Press the [F3] (LOAD) button.
The CONFIRMATION screen will appear.
5. Use the cursor [ ] [ ] buttons to select “YES,” and press the [ENTER] button.
The backup will be loaded.
* If you choose “NO,” loading will be cancelled.
NOTE
Do not strike the HandSonic’s pads while data is being loaded. The vibration may cause unexpected errors.
* Backup les are saved in the Roland/HPD-20/Backup folder of the USB ash drive.
If you want to load a backup le that you obtained from another person, place the le in this folder.
LOAD BACKUP screen
CONFIRMATION screen
“Rear Panel (Connections)” (p. 8)