Roland HandSonic HPD-20 - Menu Operations

22
Quick Guide
Menu Operations
The HandSonic has numerous parameters (items that you can set) that specify how it will operate and its sounds will be
produced. This section explains the procedure for the basic menu operations you’ll use when setting the parameters.
The basic procedure will be the same for any of the screens.
1.
Press the [MENU] button.
The MENU screen will appear.
2.
Use the cursor [ ] [ ] [ ] [ ] buttons to select an item.
Example) Select the “INST.”
3.
Press the [ENTER] button to conrm your selection.
The INST screen sill appear.
4.
Use the [F1]–[F3] buttons to select a tab.
Example) Select the “EDIT” tab. The INST–EDIT screen will appear.
* In some cases, buttons as well as tabs may be displayed.
Some screens do not have tabs.
5.
Use the cursor [ ] [ ] buttons to select a parameter.
Example) Select the “Muing” parameter.
7.
Use the [-][+] buttons or value knob to set the value.
Example) Set the value to “85.”
8.
When you’ve nished making settings, press the [KIT] button to return to
the kit screen.
The changes you’ve made will be saved automatically.
* You can return to the kit screen from any screen by pressing the [KIT] button
1
Select
2
3
4
Select a parameter
Set the value
5
6
“Parameter Guide” (p. 45)
In this manual, steps 1–4 of the above procedure will be given in the form “choose MENU INST EDIT.”