Roland HandSonic HPD-20 - Tools; Pad Copy; Copying a Pad (Pad Copy); Exchanging the Sounds of Pads

What is the HandSonic? Quick Guide Frequently Used Functions Parameter Guide Appendix
57
TOOLS
PAD COPY
PAD COPY
MENU g TOOLS g PAD COPY
Parameter/Button Explanation
Copying a pad (Pad Copy)
This copies a pad to a dierent pad. You can use this to create another pad with the same sound.
Specify the copy-source and copy-destination pads, and press the [F3] (COPY) button.
Exchanging the sounds of pads (Pad Exchange)
This exchanges the sounds of two pads.
Specify the two pads that will be exchanged, and press the [F2] (EXCHNG) button.
Upper line Species the copy-source (exchange-source) kit number and pad.
Lower line Species the copy-destination (exchange-destination) kit number and pad.
[F2] (EXCHNG) Exchanges the pads. In the conrmation screen, choose “YES” and press the [ENTER] button.
[F3] (COPY) Copies the pad. In the conrmation screen, choose “YES” and press the [ENTER] button.
KIT COPY
KIT COPY
MENU g TOOLS g KIT COPY
Parameter/Button Explanation
Copying a kit (Kit Copy)
This copies a kit to a dierent kit number. You can use this to create another identical kit.
Specify the copy-source and copy-destination kit number, and press the [F3] (COPY) button. For details, refer to p. 32.
Exchanging kits (Kit Exchange)
This exchanges the kit numbers of two kits. You can use this to change the order of kits.
Specify the two kits that you want to exchange, and press the [F2] (EXCHNG) button.
Returning a Kit to the Factory Settings
You can select one of the factory-set kits and copy it to the desired kit.
Select the copy-source kit from “PRESET,” and copy it. For details, refer to p. 32.
Creating an empty kit
You can use an empty kit to create a kit from scratch.
Specify “EMPTY” as the copy-source kit, and copy it to the desired kit.
USER/PRESET/EMPTY
USER: A conventional kit that you can select in the kit screen
PRESET: Factory-set kit data
EMPTY: A kit with no sounds, whose settings are all initialized
Upper line
Specify the copy-source (exchange-source) kit number.
* This is unavailable if you’ve selected “EMPTY.”
Lower line Specify the copy-destination (exchange-destination) kit number.
[F2] (EXCHNG)
Exchanges the kits.
* This cannot be executed if you’ve selected “PRESET” or “EMPTY.”
[F3] (COPY) Copies the kit.