What is the HandSonic? Quick Guide Frequently Used Functions Parameter Guide Appendix
11
Attaching to a Stand
If you want to play the HandSonic with a stand, use a pad stand (PDS-10; sold separately).
* You must use the screws on the bottom panel of the HandSonic. Using any other screws may cause malfunction.
* When turning the unit over, be careful so as to protect the buttons and knobs from damage. Also, handle the unit
carefully; do not drop it.
1. Using the screws on the bottom of the HandSonic, attach the PDS-10
mounting plate.
* Do not use the screws included with the pad stand.
2. Attach the HandSonic to the pad stand.
For the details on how to assemble the pad stand and use the mounting plate,
refer to the owner’s manual of the pad stand.
For easier playing, tilt the
HandSonic slightly forward.
To Next Page
Loading...
