Roland HandSonic HPD-20 - Loading a Backup from a USB Flash Drive; Load Backup; Deleting a Backup from the USB Flash Drive; Delete Backup

SYS
60
LOAD BACKUP
MENU g SYS g USB Memory g Load Backup
Parameter/Button Explanation
Loading a backup from a USB ash drive (Load Backup)
For details, refer to p. 39.
NOTE
Loading a backup will erase all data that is currently in the HandSonic.
With User Inst
Species whether user instruments will be loaded (
) or not loaded ( ).
* Depending on the size of the user instruments, it will take more than 10 minutes to load the backup when loading
the user instruments.
* If you don’t load user instruments, the user instruments currently in the HandSonic will not be erased.
Backup
Species the backup number. Backups that include user instruments are indicated by ”
.”
[F3] (LOAD) Loads the backup. In the conrmation screen, choose “YES” and press the [ENTER] button.
DELETE BACKUP
MENU g SYS g USB Memory g Delete Backup
Parameter/Button Explanation
Deleting a backup from the USB ash drive (Delete Backup)
Backup Species the number of the backup that will be deleted.
[F3] (DELETE) Executes the delete operation. In the conrmation screen, choose “YES” and press the [ENTER] button.
USB MEMORY INFORMATION
MENU g SYS g USB Memory g Information
Parameter Explanation
Viewing information about the USB ash drive (USB Memory Information)
Backups The number of backups that have been saved.
Size Used The size used, and the amount of free space (%).
FORMAT USB MEMORY
MENU g SYS g USB Memory g Format
Button Explanation
Formatting a USB ash drive (Format USB Memory)
NOTE
Formatting a USB ash drive will erase all data on that USB ash drive.
[F3] (FORMAT) Executes the format operation. In the conrmation screen, choose “YES” and press the [ENTER] button.