Roland HandSonic HPD-20 - Page 29

What is the HandSonic? Quick Guide Frequently Used Functions Parameter Guide Appendix
Sound Editing
29
Adjusting the ambience
1. Choose MENU g FX g AMBIENCE g EDIT.
The AMBIENCE–EDIT screen will appear.
2. Use the cursor [ ] [ ] buttons to select a parameter, and use the value
knob to edit the value.
* For details on each parameter, refer to “Sound List” (PDF le).
Applying ambience to the multi-eect’s sound
If you’ve applied a multi-eect unit to the sound of instruments, you can apply ambience to the sound that’s been modied
by the multi-eects.
1. Choose MENU g FX g AMBIENCE g SEND g MFX.
The AMBIENCE SEND–MFX screen will appear.
2. Use the cursor [ ] [ ] buttons to select MFX1–3, and use the value knob to
edit the value.
Specify the amount of ambience that will be applied to the sound from each multi-
eect.
With a setting of “0,” no ambience will be applied.
AMBIENCE–EDIT screen
AMBIENCE SEND–MFX screen
Multi-eect and ambience routing
The sound of a pad’s instrument A is sent to ambience (AMBIENCE SEND–PAD) before it enters the multi-eect
(MFX1–3). This allows you to adjust the amount of ambience independently for each pad of each instrument.
Applying a multi-eect can modify the sound dramatically, but the sound sent to ambience will not be modied by the
multi-eect.
You can use “AMBIENCE SEND–MFX” if you want the sound that’s been processed by the multi-eect to be sent to
ambience. However, since the multi-eect is also receiving sound from other pads, it won’t be possible to adjust the
ambience send individually for each pad.
OFF
MFX1
MFX2
MFX3
EQ
Inst A
AMBIENCE
MULTI-FX–
ASSIGN
AMBIENCE
SEND–PAD
AMBIENCE
SEND MFX