Roland JD-XA - Shortcut Keys and Troubleshooting; List of Shortcut Keys

16
List of Shortcut Keys
Shortcut Explanation
Part
[Shift]+ Part On [01]–[04] Turns part mute on/o (p. 4).
[Arpeggio]+ Part On [01]–[04] Turns each part’s Arpeggio Sw on/o (p. 9).
[Vocoder]+ Part On [01]–[04] Turns each part’s Vocoder Send Sw on/o.
Press Part On [01]–[04] + keyboard
twice (to specify the lower and
upper limit)
Species the key range of each part.
Controllers
[Shift]+[Modulation] lever
Enters the Modulation LFO setting state.
To exit this state, use [Shift] + [Modulation] lever once
again.
[Shift] + operate Wheel 1 Displays the Wheel 1 assignment (p. 12).
[Shift] + operate Wheel 2 Displays the Wheel 2 assignment (p. 12).
[Shift]+ operate Pedal 1 Displays the Pedal 1 assignment (p. 12).
[Shift]+ operate Pedal 2 Displays the Pedal 2 assignment (p. 12).
Common section
[Exit] + controller Displays the parameter (the value does not change).
[-], [+]
Hold down one button while pressing the other button to
make the value change rapidly.
[Shift]+[-] [+] Makes the value change more greatly.
[Shift]+[
K
] [
J
] Moves to the previous/next parameter section.
[Shift]+[MIDI CTRL] Turns trigger mode on/o (p. 11).
[Shift]+[Menu]
Display Lock on/o.
If this is on, the corresponding parameter is not displayed
when you move a controller (the value is changed).
[Shift]+[Write] Displays the LED Customize screen (p. 15).
[Shift]+[Enter] Executes the Manual function (p. 2).
[Shift]+[Program Select]
Displays the Init screen (p. 7).
(In the Arpeggio Edit screen, initializes the arpeggio
pattern.)
[Shift]+[Bank] Displays the Copy screen (p. 7).
[Shift]+[Favorite] Displays the Favorite Util screen (p. 7).
[Program Select]+[01]–[16] Selects a program
[Bank]+[01]–[16]
Normally: Switches the program bank (p. 4).
Favorites: Switches the favorite bank (p. 7).
[Favorite]+[01]–[16]
Registers the current program number as a favorite
(p. 7).
LFO
[Shift]+ [Tempo Sync]
Analog part: Turns LFO Key Trigger on/o.
Digital part: Turns LFO Key Trigger on/o.
[Shift]+ [AMP Depth]
Analog part: No function.
Digital part: Adjusts LFO Pan Depth.
OSC1
[Shift]+[Pitch]
Analog part: No function.
Digital part: Adjusts AMP Pan.
Part Select [01]–[04]+[Pitch] Adjust the pan of each part.
[Shift]+[PW]
Analog part: No function.
Digital part: Adjusts OSC PW Shift (Pulse Width Shift).
PITCH ENV
[Shift]+[Depth]
Analog part: Adjusts Pitch Env Velo Sens (Velocity Sens).
Digital part: No function.
FILTER
[Shift]+[Cuto]
Analog part: Adjusts FILTER Cuto Fine.
Digital part: No function.
[Shift]+[Key Follow]
Analog part: Adjusts FILTER KF Fine (Key Follow Fine).
Digital part: No function.
[Shift]+[Env Depth]
Analog part: Adjusts FILTER Velo Sens (Velocity Sens).
Digital part: Adjusts FILTER Velo Sens (Velocity Sens).
AMP
[Shift]+[Level]
Analog part: Adjusts AMP Velo Sens (Velocity Sens).
Digital part: Adjusts AMP Velo Sens (Velocity Sens).
Part Sel [01]–[04]+[AMP Level] Adjust the volume of each part.
EFFECTS
[Shift]+[TFX 1 On]
Displays the TFX 1 screen (TFX1 Sw setting does not
change).
[Shift]+[TFX 2 On]
Displays the TFX 2 screen (TFX2 Sw setting does not
change).
[Shift]+[Part MFX On]
Displays the Part MFX screen (Part MFX Sw setting does not
change).
Shortcut Explanation
PATTERN SEQ
[Shift]+[01]–[16]
[Pattern Length]+[01]–[16]
Use the [01]–[16] buttons to move the region (measures) of
performance data that is displayed (p. 8).
[01]–[16] + knob
(during Step REC2)
Records the knob operation at the specied step (position)
(p. 8).
Keyboard + [01]–[16]
(during Step REC2)
Records the keyboard note at the specied step (position).
[Shift]+[Erase] Displays the Pattern Erase menu (p. 9).
[Erase]+Part On [01]–[04]
Displays the Pattern Erase menu and assigns the specied
part as the target for erasure (p. 9).
[Erase]+[01]–[16]
Erases the all recorded data included in the specied step
of the applicable Step REC part (p. 8).
[Erase] + knob
During Realtime Erase: Assigns the knob data as the target
for erasure (p. 8).
[Shift]+[Step REC]
Displays the Step REC setting screen (p. 8).
(The Step REC status does not change)
[Shift]+[Realtime REC]
Displays the Realtime REC setting screen (p. 8).
(The Realtime REC status does not change)
[Shift]+[Tap] Displays the tempo parameter.
At the left side of the keyboard
[Shift]+OCTAVE [Up] [Down] Sets Tone Common Oct Shift (Octave Shift).
[Shift]+[Key Hold]
Switches the Kbd Velocity setting (Real
,
xed value
(default:127)) (p. 12).
[Shift]+[Arpeggio]
Displays the arpeggio screen (p. 9).
(The arpeggio switch does not change)
&
For details on the parameters, refer to “Parameter Guide (English)” (PDF).
* “[A]+[B]” indicates the operation of “holding down the [A] button and pressing the [B] button.”