Roland Juno-1 - Page 16

b.
Writing the
Performance Control
Functions
if
you wish to
retain the data of Tune/Function
even after the a JUNO
is switched off, you should
write it in the
back-up
memory.
<OPERATION>
®
Set
the Memory
Protect Switch
® to the
OFF
position.
(?)
Push the
Tune/Function Button
.
(3)
While
holding
the Write
Button
®
down,
press the
Tune/Function
Button
©.
The
Display
©
will respond
with:
While
hoidtng the
Write Button
®
down
\
When the
Tune/Function Button
O
is pushed.
Return
the
Memory protect
Switch
@
to
the ON
position.
16