Roland Juno-1 - Edit; Edit Operation

6. Edit
Here, call
each
parameter
of
a
tone
color and
change it Regarding
the
details
of
the
paranneters,
see page
18
"7.
Tone
Color
Parameters".
<OPERATION>
®
Call the
tone color
you wish
to edit
@
Push the
Parameter
Selector
Button
®,
The
Display will
respond
with:
Example
Parameter
Name
value
(4)
Push the
Value Button
®.
As shown in the picture,
on the
right of the Display
®,
the current
value and
the prospective
value
are
shown.
Example
T
Previously
set value
New value
(D
Using the
a Dial
O,
call
the
parameter
you
wish to change.
(5)
Using the a Dial
O,
change to
the value
you like.
®
Repeat
the
steps
(5)
to
(5)
as many times
as necessary.
17