Roland JUNO-DS - Data Management and System Operations; Backing Up JUNO-DS Data; Restoring JUNO-DS Data; Restoring JUNO-Di Backup Data

18
Overall Settings for the JUNO-DS
Saving JUNO-DS’s Data to USB Flash Drive (BACKUP)
Here’s how to backup user data to USB ash drive.
Types of data that can be saved
5
User data for patches and performances
5
Favorites
5
User data for vocoder/auto pitch
5
Samples
5
User patterns
5
System settings
5
User scale
5
DAW CONTROL
NOTE
Never turn o the power or remove the USB ash drives while the screen indicates
“Processing....”
1.
In the UTILITY screen, move the cursor to “BACKUP,” and press the [ENTER]
button.
The BACKUP NAME screen appears.
2.
Enter the le name.
MEMO
For more about entering a name, refer to “Saving Your Settings (Write)” (p. 10).
3.
When you’ve specied the le name, press the [ENTER] button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
4.
Move the cursor to “OK,” and press the [ENTER] button.
When backup is completed, the display indicates “Backup Completed!”
Restoring Saved Data from USB Flash Drive Back into the JUNO-DS
(RESTORE)
Here’s how to restore backed-up user data from USB ash drive into the JUNO-DS
(Restore).
NOTE
5
When you execute the restore operation, all user data is rewritten. If the
JUNO-DS contains important data, back it up on a USB ash drive using a
dierent name before you execute the restore operation.
5
Never turn o the power or remove the USB ash drives while the screen
indicates “Processing....”
1.
In the UTILITY screen, move the cursor to “RESTORE,” and press the [ENTER]
button.
The RESTORE screen appears.
2.
Move the cursor to the le that you want to restore.
Deleting or renaming a le
1.
In the RESTORE screen, press the [MENU] button.
The FILE UTILITY window appears. The window closes if you press the button
once again.
2.
Move the cursor to “DELETE” or “RENAME,” and press the [ENTER] button.
Function Explanation
DELETE
When you press the [ENTER] button, the message “Are you sure?” appears.
Move the cursor to “OK” and press the [ENTER] button.
The selected le is deleted.
RENAME
When you press the [ENTER] button, the RENAME screen appears, allowing
you to rename the selected le.
3.
Press the [ENTER] button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
4.
Move the cursor to “OK,” and press the [ENTER] button.
When restore is completed, the display indicates “Completed. Please Shut down.”
5.
Turn the power of the JUNO-DS o, then on again.
Loading JUNO-Di Backup Data into the Unit (RESTORE (JUNO-Di))
JUNO-Di user data that was backed up to a USB ash drive can be loaded back into
the JUNO-DS.
NOTE
5
When you execute the restore operation, all user data is rewritten. If the
JUNO-DS contains important data, back it up on a USB ash drive using a
dierent name before you execute the restore operation.
5
Never turn o the power or remove the USB ash drive while the screen
indicates “Processing....”
1.
In the UTILITY screen, move the cursor to “RESTORE (JUNO-Di),” and press
the [ENTER] button.
The RESTORE screen appears.
2.
Move the cursor to the le that you want to restore, and press the [ENTER]
button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
3.
Move the cursor to “OK,” and press the [ENTER] button.
When restore is completed, the display indicates “Completed. Please Shut down.”
4.
Turn the power of the JUNO-DS o, then on again.
Returning to the Factory Settings (FACTORY RESET)
You can return all of the JUNO-DS’s user settings to the state when the instrument
was shipped from the factory (Factory Reset).
NOTE
5
If the JUNO-DS’s internal memory contains important data that you’ve created,
be aware that all of this user data will be lost when you execute the factory
reset operation. If you want to keep this data, save it to USB ash drive before
you continue.
5
Never turn o the power or remove the USB ash drive while the screen
indicates “Processing....”
1.
In the UTILITY screen, move the cursor to “FACTORY RESET,” and press the
[ENTER] button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
2.
Move the cursor to “OK,” and press the [ENTER] button.
When factory reset is completed, the display indicates “Completed. Please Shut
down.”
3.
Turn the power of the JUNO-DS o, then on again.
Playing the Demo Songs
1.
Press the [MENU] button.
The MENU screen appears.
2.
Move the cursor to “DEMO PLAY,” and press the [ENTER] button.
The DEMO MENU screen appears.
3.
Use the [K] [J] buttons to select a demo song, and press the [ENTER]
button.
Demo song playback starts.
*
No data for the music that is played will be output from MIDI OUT connector and
USB COMPUTER port.