Roland Juno-GJ - System Operations and Maintenance; Checking System Version Number; User Data Backup Procedure

15
Apr. 2006 JUNO-G/JUNO-G (J)
Checking Version Number
1. Turn on the power of the JUNO-G.
2. Press the [MENU] button in EDIT section on the top panel.
3. Press [ ] [ ] to select 2. System, and press [ENTER].
System Menu appears.
fig.00
4. Press [F6 (INFORMATION)].
SYSTEM INFO appears.
fig.01
5. Press [F3 (VERSION)] to confirm the System Program version.
fig.02
6. After confirming, press [EXIT] to return to PATCH PLAY screen.
Data Save (User Backup)
Saves all of user data in the User Area to a memory card. User data which are
saved by this procedure are as follows.
• Performances
• Patches
• Rhythm Sets
• Rhythm Patterns
• Rhythm Groups
• Arpeggio Styles
• Songs
• Samples
• Chord Forms
• System Settings
* When executing User Backup, about 16 MB as the maximum free space is
necessary in the memory card.
1. Insert a memory card into the slot.
2. Press [MENU] in EDIT to open Top Menu.
3. Press [ ] [ ] to select 3. Utility], and press [ENTER].
UTILITY MENU appears.
fig.03
4. Press [F1 (BACKUP)].
Confirming message appears.
fig.04
5. Press [F6 (EXEC)] to execute the backup.
6. Press [EXIT] to return to PATCH PLAY screen.
Function Buttons
Six buttons of [KBD/ORG]--[VOCAL/PAD] standing in the bottom of
the screen work as buttons (Function Buttons) to select various functions.
They are written like [F1]--[F6] in this document.