Roland Juno-GJ - User Data Restore Procedure; Factory Reset Procedure; System Update Procedure

16
Apr. 2006 JUNO-G/JUNO-G (J)
Data Load (User Restore)
Restores the user data which have been saved in the memory card with the
User Backup to User Area in JUNO-G.
* All of contents in User Area will be erased after executing User Restore.
1. Insert the memory card in which user data have been saved.
2. Press [MENU] in EDIT to open Top Menu.
3. Press [ ] [ ] to select 3. Utility, and press [ENTER].
UTILITY MENU appears.
fig.03
4. Press [F2 (RESTORE)].
Confirming message appears.
fig.05
5. Press [F6 (EXEC)] to execute the restore.
6. After the message “Completed. Turn the Power off and on again.”
appears, turn off and on the power of the JUNO-G.
Factory Reset
All data in User Area will be lost after executing Factory Reset. If the data
which should not be lost are left in the JUNO-G, save them in memory card by
User Backup function. Refer to Data Save (User Backup) (p. 15).
Never turn off the power while executing Factory Reset. Contents of memory
may be lost.
1. Press [MENU] in EDIT to open Top Menu.
2. Press [ ] [ ] to select 3. Utility, and press [ENTER].
UTILITY MENU appears.
fig.03
3. Press [F3 (FACTORY)].
Confirming message appears.
fig.06
4. Press [F6 (EXEC)] to execute Factory Reset.
5. After the message “Completed. Turn the Power off and on again.”
appears, turn off and on the power of the JUNO-G.
System Update
Before executing System Update, save data in the User Memory to memory
card by User Backup function. Refer to Data Save (User Backup) (p. 15).
Required Items
• JUNO-G
• UPDATE CD-ROM (#17041856)
• Memory Card x 2 (1 GB or less, for updating and for backup of User
Data)
• PC (with a CD-ROM drive and a memory card reader/writer, OS:
Windows Me/2000/XP)
* Don’t use Macintosh.
Update Procedure
1. Save the data in User Memory to a memory card. Refer to Data Save
(User Backup) (p. 15).
2. Boot up the PC, and insert the UPDATE CD-ROM and a memory card
which is not used in step 1.
3. Format the memory card by the PC.
4. Copy the “Roland” folder with its contents in the UPDATE CD-ROM to
the memory card.
5. Release the connection of the PC and the card reader/writer by device
eject button shown in the taskbar at the lower right of the PC screen.
6. Remove the memory card from the card reader/writer.