T
Thomas BrownSep 7, 2025
Why is there no sound from a specific range of keys on my Roland Synthesizer?
- MMichael RussoSep 7, 2025
If you don’t hear sound from a specific range of keys on your Roland Synthesizer, check the key range settings.
To Next PageTo Next PageWhy is there no sound from a specific range of keys on my Roland Synthesizer?
If you don’t hear sound from a specific range of keys on your Roland Synthesizer, check the key range settings.
Why is the effect not applied on my Roland Jupiter-50?
First, check the on/off setting of each effect. Then, ensure each layer’s Output Assign is set to 'MFX'. Finally, confirm that the send level to each effect is not set to 0. The effect won’t be obtained if the send level to that effect is set at 0. Even if the send levels to the effect are set above 0, the effect won’t be applied if the multi-effect output level, or reverb level are set to 0. Check each of these settings.
What to do if data on the USB flash drive was damaged on my Roland Jupiter-50?
Format the USB flash drive on the JUPITER-50 if you turned off the power while the USB song player/recorder was operating.
Why does changing the tempo not affect the arpeggio tempo or delay time on my Roland Synthesizer?
If the system setting 'USB Song Sync Mode' has been set to 'SLAVE,' change the tempo of the external device that is transmitting MIDI clock data. If 'Sync Mode' is set to 'SLAVE.'
General| Bit rate | 16 bit |
|---|---|
| Pitch wheel | Yes |
| Product type | Digital synthesizer |
| Product color | Black |
| Sound effects | Reverberation |
| Keyboard number of keys | 76 |
| Maximum polyphony (notes) | 128 |
| Display type | LCD |
| Power source type | DC |
| Headphone outputs | 1 |
| 6.35 mm (1⁄4-inch) input | 2 |
| 6.35 mm (1⁄4-inch) output | 4 |
Weight and Dimensions| Depth | 361 mm |
|---|---|
| Width | 1268 mm |
| Height | 117 mm |
| Weight | 11000 g |
