3
Using the JUPITER-8 Model Expansion
This manual explains how to use JUPITER-8 Model Expansion with the JUNO-X.
There are two ways to use JUPITER-8 Model Expansion.
In this manual, we explain how to do this via Roland Cloud Manager.
Updating the JUNO-X to the Latest Version
Before using the JUPITER-8 Model Expansion, you must update the
JUNO-X to the latest version.
Download the latest software from the website below, and follow the
steps listed to update.
https://roland.cm/juno-x_dl
Downloading the JUPITER-8 Model Expansion by
Using Roland Cloud Manager
This explains how to use Roland Cloud Manager to download and
install the JUPITER-8 Model Expansion les.
Installing the Roland Cloud Manager
1. On your computer, download Roland Cloud
Manager from the Roland Cloud website.
Access the website listed below to download the appropriate
installer for your computer.
https://roland.cm/RolandCloudManager
2. Double-click the installer you downloaded to begin
the installation.
Proceed with the installation by following the directions shown
onscreen.
When you see a message saying that the installation was
successful, click the [Close] or [Finish].
3. Start the Roland Cloud Manager that you installed,
and register your account.
Follow the onscreen instructions to register.
Downloading the JUPITER-8 Model
Expansion
1. Start Roland Cloud Manager.
2. Click “Hardware” on the Menu tab.
A list of hardware appears.
3. Click “JUNO-X”.
A list of contents appears.
4. Click JUPITER-8 Model Expansion.
The JUPITER-8 Model Expansion download page appears.
5. Click “Get Lifetime Key” to purchase a Lifetime Key.
6. Once you’ve made your purchase, click “Library” on
the Menu tab.
A list of the contents you have purchased appears.
7. Select “JUPITER-8 Model Expansion” and download.
Using Roland Cloud Manager
On your computer, use the Roland Cloud Manager to download the
JUPITER-8 Model Expansion les from Roland Cloud.
Use a USB ash drive to import the les into the JUNO-X.
¹ Click here for more information on Roland Cloud.
¹ Click here to download the Roland Cloud Manager and Owner’s
Manual.
* You must purchase a Lifetime Key for the data if you want to use
Roland Cloud Manager.
* Data that was downloaded with only a Roland Cloud
membership can’t be loaded into the JUNO-X.
Using Roland Cloud Connect
Use Roland Cloud Connect (sold separately) and your smartphone
to import the JUPITER-8 Model Expansion les into the JUNO-X.
¹ Click here for more information on Roland Cloud Connect.
* If you are using Roland Cloud Connect (sold separately), you can
use the JUPITER-8 Model Expansion les even on a membership
basis.
To Next Page
Loading...
Need help?
General
