I
Write
Mode
I
Protect
Protect
This function
prevents
data stored in internal memory from being inadvertently erased or altered.
WRITE PROTECT
WRITE IB OH
PROTECT
IB
Write Protect ON/OFF
The protect function is effective
when
this is set to
ON,
and is disabled when set to OFF. Be sure to
turn it
OFF
when writing Patch data
and Tone data from the card or
temporary
area
to internal
memory. Also
turn
it off
when overwriting
the interna! memory
with
bulk
data received over
MIDI.
This is
always
set to ON as a default setting (when the power is turned on).
[Operation]
change the protect ON/OFF setting by using |INC|/|DEC]. or Parameter Slider 1
.
166
To Next Page
Loading...
