Roland JV-80 - Page 210

Index of
Functions and
Operations
The various
operations of the JV-80 and the pages
to which you should
refer to for more information are
given in this section.
^ When a
mode name is shown in parentheses, like
(Patch Play mode), the following
explanation is related to
the functions and the
operations of that mode.
Play
SOUND
In this
section, page references are
given
for
changing tlie parameters of the Patch and
Performance Play modes and the system
common
parameters.
1. Changing the level of
the sound
• Change
the volume
Turn
down
the master
volume on the side panel
9
Assign
volume
control
to foot pedals 1 or2. onheCl slider and adjust
73
• (Performance Play
mode) Maintain the proper balance
among the
Parts
To
set the Part level
-»
Select the
Part Level page by pressing [T.EVEL
|
.
then set
the value
with
the
Parameter Slider 59
•
(Patch Play mode)
Maintain the proper balance amon
g
the
Tones
To set
the Tone level
-^
Select the
TVA Level page
by
pressing
|
LEVEL
j
.
then set the
value
with
the Parameter
Slider
36
2. Changing the pitch
of the sound
• Adjust
the tuning of the entire JV-80
To set the master tune
value
of the
system common parameters
-*
Press
I
TUNE
|
and select the TUNE
& FUNCTION page
73
• (Performance Play mode) Set
the pitch for each Part
To
set the coarse tune and fine tune
values
^
Press
!
COARSE TUNE]and
select the Part Coarse Tune page
59
Press
!
FINE TUNE
l
and select
the Part Fine Tune page
59
•
(Patch Play mode)
Set the pitch for each Tone and create
chorus and detuning
effects
To set the coarse tune and fine
tune values
->
Press
!
COARSE TUNEI and select the Coarse Tune page
41
Press
|
FINE TUNE
[
and select the Fine Tune page
43
•
Change the pitches in realtime
for
added
expression during live performance
Move the pitch bender
lever
18
Assign pitch bend
control to foot pedals 1 or 2, ortheCl slider and move them
73
3. Changing the
stereo position of the sound Image and
pan
•
(Performance Play mode)
Adjust the stereo position of each
Part to produce
greater
movement and space In the sound
To
adjust the Part pan setting
-^
Press
j
PANj and select the Part Pan page, then adjust
with the Parameter Slider
59
• (Patch Play mode)
Adjust the pan setting for each Tone to
lend an expansive feeling
to
the sound of the Patch, or to move the
stereo
position to
one side.
To adjust the pan setting
->
Press] PAN] and select
the
Pan page
59
210