Delay
The delay effect for the JX-03 is adjustable, and the settings are saved with each patch. There are no global delay
settings for the module. Each patch must be set to your preferences and these settings are then saved with your
patches respectively.
To adjust the delay settings in a patch:
DELAY VOLUME
1.
Press and hold MANUAL + PATCH 14
2.
Select from 1-16 (OFF = 1)
DELAY TIME
1.
Press and hold MANUAL + PATCH 15
2.
Select from 1-16
DELAY FEEDBACK
1.
Press and hold MANUAL + PATCH 16
2.
Select from 1-16
To Next Page
Loading...
