Need help?Do you have a question about the Roland JD-08 and is the answer not in the manual?
General| Product type | Digital synthesizer |
|---|---|
| Product color | Black |
| Sound effects | Chorus, Delay, Echo, Overdrive, Phaser |
| Backlight color | Red |
| Backlight buttons | Yes |
| Sound effects quantity | 6 |
| Keyboard number of keys | 0 |
| Preset programs quantity | 256 |
| USB ports quantity | 1 |
| Battery type | AA |
| Power source type | Battery, USB |
Explains the controls in the first section of the panel.
Describes the controls in the second section of the panel.
Details the PALETTE section sliders for controlling tone settings.
Covers the LFO 1/2 section for sound modification.
Explains the PITCH/TVF/TVA envelope controls for sound shaping.
Details the WG section for selecting waveforms and setting pitch.
Explains the TVF section for altering the tone's sound using filters.
Describes the TVA section controlling the layer's volume.
Explains the function of the EXT CLK IN Jack.
Details the various connectors on the rear panel of the unit.
Instructions on how to switch between groups and banks for patches.
Steps to save edited tone data to a patch.
How to activate and use the portamento glide effect.
Steps to configure the arpeggio settings using the VALUE knob.
Details the parameters and their values for arpeggio settings.
How to select and play back sequencer patterns.
How to set the tempo for patterns.
Various ways to input notes and create patterns.
Capturing performances and adjusting note parameters.
Steps to save created or edited patterns.
Using the K-25m for note input.
Details how to configure the effects included in group A.
Details how to configure the effects included in group B.
Settings for parts, layers, envelopes, tone key range, and EQ.
Configuration for LFO modulation and waveform generation.
Settings for keyboard touch and MIDI communication.
System-wide settings and editing utilities.
A comprehensive list of available waveforms.
To Next Page
