Roland JD-08 - Effect B Settings

Configuring the Effects
36
Effect B
Recreates the effects included in group B of the JD-800.
Effect B is only enabled for PART A.
Delay
Step
buttons
Parameter Value Explanation
[1]
dL.Sľ
OFF
,
On
Turns the delay on/off.
[2]
C.Syn
OFF, On
When this is set to on, the delay audio output that is
heard from the center is synchronized with the
tempo.
[3]
C.TiN
0.1
–
600.0
Sets the delay time for the delay audio output from
the center when the
C.Syn
is off.
[4]
C.not
64t
,
1_64
,
32t
,
1_32
,
16t
,
1_32.
,
1_16
,
1_8t, 1_16., 1_8, 1_4t, 1_8., 1_4, 1_2t,
1_4., 1_2, 1t, 1_2., 1, 2t, 1., 2
“
About note values (p. 37)”
Sets the delay time (as a note length) for the delay
audio output from the center when the C.Syn is on.
[5]
C.LEU
0
–
100
Adjusts the volume of the delay sound from the
center.
[6]
L.Syn
OFF, On
When this is set to on, the delay audio output that is
heard from the left is synchronized with the tempo.
[7]
L.TiN
0.1
–
600.0
Sets the delay time for the delay audio output from
the left when the
L.Syn
is off.
[8]
L.not
64t, 1_64, 32t, 1_32, 16t, 1_32., 1_16,
1_8t, 1_16., 1_8, 1_4t, 1_8., 1_4, 1_2t,
1_4., 1_2, 1t, 1_2., 1, 2t, 1., 2
“
About note values (p. 37)”
Sets the delay time (as a note length) for the delay
audio output from the left when the L.Syn is on.
[9]
L.LEU
0
–
100
Adjusts the volume of the delay sound from the left.
[10]
R.Syn
OFF
,
On
When this is set to on, the delay audio output that is
heard from the right is synchronized with the tempo.
[11]
R.TiN
0.1
–
600.0
Sets the delay time for the delay audio output from
the right when the
R.Syn
is off.
[12]
R.not
64t
,
1_64
,
32t
,
1_32
,
16t
,
1_32.
,
1_16
,
1_8t, 1_16., 1_8, 1_4t, 1_8., 1_4, 1_2t,
1_4., 1_2, 1t, 1_2., 1, 2t, 1., 2
“
About note values (p. 37)”
Sets the delay time (as a note length) for the delay
audio output from the right when the R.Syn is on.
[13]
R.LEU
0
–
100
Adjusts the volume of the delay sound from the right.
[14]
Fb
-98
–
98 (%)
Adjusts the proportion of the delay sound that is fed
back into the effect. (Negative values invert the
phase.)
When the center delay sound is fed back, the
feedback delay sounds to the left and right are also
inputted.