Backing Up Data
39
Backing Up Data
You can save (backup) the tones, patterns and system settings stored on the JD-08 to your computer.
This backup data can then be restored to the JD-08 at a later date.
1.
Connect your computer to the JD-08 with a USB cable.
2.
While holding down the [EXIT] button, turn on the power.
The JD-08 operates in USB mass storage mode. The JD-08 is recognized by your computer as an external storage device. It
takes around 20 seconds for the connection to be recognized.
3.
Open the “JD-08” on your computer.
The “BACKUP” folder is located in the JD-08.
4.
Open the “BACKUP” folder.
The backup file appears.
5.
Copy (drag and drop) the backup file to your computer.
6.
Disconnect the JD-08 from your computer.
If you’re using Windows, click the Safely Remove Hardware icon in the taskbar ( ) and then click “Eject Boutique.”
If you’re using macOS, drag the JD-08 icon to the trash.
7.
Turn off the JD-08.
To Next Page
Loading...
