Roland JD-08 - Page 38

Configuring the Effects
38
Step
butt
ons
Param
eter
Value Explanation
[4]
Er.Lv
0
–
100
Sets the sound level of the direct reflections from the walls and the early
reflections after the original sound is produced. This is an expression of the
distance from the sound source (the original sound) to the walls. Larger values
indicate a shorter distance to the walls.
This parameter is disabled if Gate, reIJ, FLY.1 or FLY.2 are selected for the
TYPE.
The early reflection level and reverb level work separately. For this reason, the
early reflection can still be heard even when the reverb level is “
0
”.
[5]
hf.dN
500
,
530
,
800
,
1k
,
1.25k
,
1.6k, 2k, 2.5k, 3.15k, 4k,
5k, 6.3k, 8k, 10k, 12.5k,
16k
(Hz),
byPS
Sets the frequencies to cut in the high-frequency portion of the reverberation.
The high-frequency portion of reverb sounds decays differently depending on
the wall material. This parameter simulates this kind of high-frequency decay.
●
byPS: bypass
[6]
R.tiN
Sets the reverberation time. Higher values produce longer reverberations.
0.1
–
20.0
(s)
The reverb time when
Type
is
roN
,
roN2
, or
haL.1
–
haL.4
5
–
250
(ms)
The reverb time when
Type
is
Gate
,
reIJ
,
FLY.1
,
FLY.2
[7]
r.LEU
0
–
100
Sets the reverberation volume.