Roland JD-08 - Setting the Tone Key Range

Configuring the Settings of This Unit
47
Setting the Tone Key Range
Sets the key range for each tone. Set this when you want different key ranges to play different tones.
The
FĈ3
display indicates “F´3.”
Step buttons
Item
Value
Explanation
[1]
Rg.A.L
C-
–
G9
Sets the lower limit of the key range for TONE A.
[2]
Rg.A.H
C-
–
G9
Sets the upper limit of the key range for TONE A.
[3]
Rg.B.L
C-
–
G9
Sets the lower limit of the key range for TONE B.
[4]
Rg.B.H
C-
–
G9
Sets the upper limit of the key range for TONE B.
[5]
Rg.C.L
C-
–
G9
Sets the lower limit of the key range for TONE C.
[6]
Rg.C.H
C-
–
G9
Sets the upper limit of the key range for TONE C.
[7]
Rg.D.L
C-
–
G9
Sets the lower limit of the key range for TONE D.
[8]
Rg.D.H
C-
–
G9
Sets the upper limit of the key range for TONE D.
These parameters set how much the pitch bend controller changes the pitch when you use it.
Step buttons
Item
Value
Explanation
[9]
bnd.D
0–48 (semitones)
Sets the lower limit of the pitch bend controller.
[10]
bnd.U
0–12 (semitones)
Sets the upper limit of the pitch bend controller.