Roland JD-08 - Configuring the Layer Settings

Configuring the Settings of This Unit
43
Configuring the Layer Settings
Step
buttons
Parameter (as
displayed)
Value Explanation
[1]
U.CrU
Selects the intensity (curve) of each envelope according to how hard you press the
keys (the velocity).
The envelopes that produce change are PITCH, TVF and TVA.
1
2
3
4
[2]
HOLd
OFF
,
On
Sets whether the tone sustains when you operate the hold pedal.
[3]
F.AFt
-50
–
50
Sets how much the aftertouch you use changes the cutoff frequency.
[4]
F.AFt
-50
–
50
Sets how much the aftertouch you use changes the volume.