Roland JX-3P - Page 7

7
©Hold button
By
pressing this button
(the
indicator lights
up),
fhe Hoid function
is
available, so even
after
a
key
is
released,
the
sound maintains.
The
sound level
is
determined
by
the sus-
tain
level set with the Sustain knob In the
Envelope Generator. This hoid function is
not obtained if the sustain level is set
to
zero (decay sound). Each time you press
the
button,
the
hold function turns on or
off
(^P.28).
(9)
Key
Transpose button
Transposition
to
any key
is
possible. By
using the
appropriate key,
you
can shift
the pitch
of
the entire keyboard.
There-
fore, you can play a
piece
with
many
#
's
and
b
's
in the key of
C
major
(A
minor).
*
How
to transpose
While holding the Key Transpose
button
down, press any key In any octave. If the
indicator above lights up, transposition is
completed and
the
JX-3P will
now play in
the key of the chosen note.
Key
-t=n
-^^
+
ill
TraiupDH
^How to
return
to the normal
key (C key}
While holding the
Key Transpose button
down, press any
C
note, and
the indicator
will go out and the JX-3P
has returned to
the normal condition
(the key of
C).
'This transpose function
is also available
for the
sequencer.
(You can
transpose the
sequencer phrase
being played.)