2
TTD-10 (TDW-1 V-Cymbal Control, TDW-1)
TD-10 (Non expanded)
TD-8
TD-6
TD-7 (*2)
TD-5
SPD-20
SPD-11
HPD-15
Trigger Type K80
Sensitivity 8
Threshold 5
Curve Linear
Scan Time (*1) 2.0
Retrigger Cancel (*1) 8
Mask Time (*1) 8
Xtalk Cancel (*1) OFF
Mount Type (*1) Separate
Trigger Type K2
Sensitivity 5
Threshold 0
Curve Linear
Scan Time (*1) 2.0
Retrigger Cancel (*1) 8
Mask Time (*1) 12
Xtalk Cancel (*1) OFF
TRIGGER TYPE K8
SENSITIVITY 9
THRESHOLD 3
CURVE LINEAR
SCAN TIME 1.5
RETRIG CANCEL 5
MASK TIME 0
XTALK CANCEL 25
TrigType KD Type
Sensitivity 10
Threshold 4
TrigCurve LINEAR
Xtalk Cancel 20
Scan Time 2.0
Retrig Cancel 5
Mask Time 4
Cross Talk Group OFF
Velocity Curve Norm3
Choke OFF
Max Dyna 3
MIn Dyna 1
Min Velo 1
Mask Time 12
Threshold 1
TRIGGER TYPE K2
SENSITIVITY 11
THRESHOLD 2
CURVE Lnr
Trig Sens 12
Trig Threshold 0
Trig Type K1
Trig Curve 0
Trig Sens 12
Trig Threshold 1
Trig Mask Time 12
Trig Scan Time 20
Input Mode TRIGx2
Trig Type KD-80
Trig Sens 12
Curve Linear
Threshold 2
Scan Time 1ms
Retrig Cancel 4
Mask Time 4ms
X-Talk Rate 40%
Recommended settings for the trigger parameters when using the KD-80 with various percussion sound
modules.
• The trigger parameters should be adjusted as necessary to match the actual state of your configuration, and the
environment in which it is being used.
• For information on how to change the parameters for a percussion sound module, refer to the documentation for the
percussion sound module you’re using.
Recommended Settings for the Percussion Sound Module
*1: You need to set each advanced trigger parameter after setting the trigger type.
*2:
Each trigger parameter can be set independently for the “head-side” and “rim-side.” Set to the same value for the head and rim.
Trigger parameters can be set individually for each patch.
KD-80 (V-Kick Trigger)
Pad Size: 8 inches
Dimensions: 440 (W) x 340 (D) x 465 (H) mm 17-3/8 (W) x 13-7/16 (D) x 18-5/16 (H) inches
Weight: 4.8 kg 10 lbs 10 oz
Accessories: Owner’s Manual, Connection Cable, Beater, Tuning Key
Options: Mesh Head (MH-8)
* In the interest of product improvement, the specifications, appearance of this unit and/or contents of this package are subject to change
without prior notice.
Specifications
To Next Page
Loading...
