Roland V-Drums PDX-8 User Manual

*04126934- 03*
04126934 06-07-3N
Owner’s Manual
Thank you, and congratulations on your choice of the Roland PDX-8.
201a
Before using the PDX-8, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT
NOTES” (p. 2; p. 3). These sections provide important information concerning the proper operation of the
unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by
your new unit, this owner’s manual should be read in its entirety. The manual should be saved and kept on
hand as a convenient reference.
fig.Cover.e
202
Copyright © 2006 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in
any form without the written permission of ROLAND CORPORATION.
VERY IMPORTANT!!!
• BEFORE playing the pad, you must tension the head. See Page 4.
• Trigger type and trigger parameters in the sound module must be adjusted.
See Page 5.
• Adjust the Rim Sensitivity in the sound module. See page 5.
Rim Rubber
Hoop
Tuning Bolt
Stand Fixing Screw
Head
Head Sensor
Rim Sensor
Holder
Shell
Output Jack
Contents of the Package
Names of Components
❑ PDX-8 (pad unit)
❑ Connection Cable
❑ Tuning Key
■ Owner’s Manual (this manual)
PDX-8_e 1 ページ ２００６年７月１０日 月曜日 午後２時１９分

Roland V-Drums PDX-8 Specifications

General

Pad Type	Mesh Head
Zones	2 (Head, Rim)
Compatibility	Roland V-Drums
Pad Size	10 inches
Trigger	Dual Trigger

Summary

Using the Unit Safely

Warning and Caution Notices

Explains the meaning of WARNING and CAUTION symbols used in the manual.

Understanding Safety Symbols

Explains the meaning of various safety symbols like prohibition and mandatory actions.

General Safety Precautions

Lists critical safety rules to follow during operation and placement of the unit.

Important Notes

Unit Placement Guidelines

Advises on avoiding direct sunlight, heat, and extreme temperatures for proper unit function.

Cleaning and Maintenance

Provides instructions for cleaning the unit using soft cloths and mild detergents.

Additional Usage Precautions

Offers advice on handling controls, connecting cables, and managing neighborly noise.

Adjusting the Head Tension

Tensioning the Head

Instructions on how to tighten the pad's head using the tuning key for optimal response.

Attaching the Pad to a Stand

Guide on securely attaching the PDX-8 to a compatible drum stand mount.

Connecting to Sound Module

Steps for connecting the PDX-8 to a percussion sound module using a stereo cable.

Trigger Settings for Percussion Sound Module

Recommended Settings

Provides recommended trigger type and parameter settings for various Roland sound modules.

Rim Sensitivity Adjustment

Guidance on adjusting Rim Sens for proper rim shot and cross stick trigger detection.

Positional Sensing Configuration

Notes on disabling positional sensing for specific sound modules like TD-12/TD-20.

Playing Methods

Head Shots

Instructions on how to play head shots, emphasizing not to strike the hoop.

Rim Shots

Details on striking the rim in the correct area to produce rim shots.

Cross Stick

Guidance on playing cross stick sounds by striking only the rim of the pad.

Head Replacement

When to Replace the Head

Identifies signs indicating the head needs replacement due to wear or slackness.

Replacing the Head Steps

Step-by-step instructions for removing the old head and installing a new one.

Specifications

Technical details including head size, triggers, dimensions, weight, and accessories.