EasyManua.ls Logo

Roland MC-808 - Playing Arpeggios with Chords (Arpeggiator)

Roland MC-808
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
53
Patch editing parameters
These parameters specify how the tones will be combined, and how they will be played.
Portamento Start PITCH,
NOTE
Portamento begins anew if you press another key during a pitch movement. This setting specifies how
the new portamento starts.
PITCH:
The pitch begins changing immediately to the new note’s pitch when its key is pressed.
NOTE:
The pitch begins changing to the new note’s pitch only after it has first reached its original pitch
destination.
Portamento Time 0–127 Time over which the next pitch is reached
Unison Switch OFF, ON Switches the detune effect on/off
If this is “ON,” the sound of the selected patch will be layered (three notes), producing a fatter sound.
* If this is turned “ON,” the Mono/Poly parameter will also be set to “MONO,” and the selected patch
automatically uses single notes.
Unison Fat Level 0–127 Strength of the detune effect
Increasing this value will cause the pitch of the layered notes to be raised and lowered farther away
from each other (maximum one octave up and down).
TMT (Tone Mix Table)
Parameter
Value Description
Structure Type 1&2 (3&4)
1–10 How tones 1 and 2, or 3 and 4, will be combined
B
indicates Booster, and
R
indicates Ring Modulator.
* If you select Type 2–10 and turn off one of the tones, the other tone will use the conventional
configuration of WG/TVF/TVA.
Booster 1&2 (3&4)
(Booster Gain)
0, +6, +12,
+18 dB
Depth of the booster effect when “Type” is set to 3 or 4
TMT (Tone Mix Table)
Specifies how each tone will be played according to the velocity. These settings are collectively referred to as the TMT (Tone Mix Table).
Velocity Control
(TMT Velocity Control)
OFF, ON,
RANDOM
Specifies whether velocity data will be used (ON) or ignored (OFF)
If you specify RANDOM, the tones will sound randomly, regardless of velocity data.
Parameter
Value Description
C5
D4
C4
press D4 key
Pitch
Time
press C4 key
press C5 key
C5
D4
C4
press D4 key
Pitch
Time
press C4 key
press C5 key
1
L.Fade value
U.Fade value
Level
Velocity
Upper
Lower
MC-808_Slist_e.book 53 ページ 2007年9月7日 金曜日 午前11時11分

Other manuals for Roland MC-808

Related product manuals