11
Creating an original song (pattern)
4.
When you have finished entering the name, press [F6 (Write)].
A screen in which you can select the write destination will appear.
fig.Q1-15
5.
Use [CURSOR (left/right)] to select whether you will save the sample in
the user area or on a memory card.
For this example, select the user area (User).
6.
Use [VALUE] or [INC/DEC] to select the write-destination user sample.
For this example, select “U0001.”
7.
Press [F6 (Write)].
A message will ask whether you are sure you want to save the sample.
fig.Q1-16
8.
If you want to save the sample, press [F6 (Execute)].
* To cancel, press [F5 (Cancel)].
Next we will create a patch from the sample that we just saved.
If the write-destination
sample already contains
data, that data will be
erased.
QS_e 11 ページ ２００５年６月２２日 水曜日 午後３時１５分
To Next Page
Loading...
